博彩送彩金赢钱可提现

PRODUCTS
HENAN HENGAN BOILER GROUP CO., LTD.
— Product —

Autoclave

  • Specifications:
  • Thermal efficiency:
  • Applicable fuel:
  • 高强石膏、保温材料、橡胶制品、高强玻璃、水泥管桩以及木材、医药、化工等行业。 Applications: high-strength gypsum, thermal insulation materials, rubber products, high-strength glass, cement pipe piles, wood, medicine, chemical and other industries.

本釜是对加气混凝士、灰砂砖、煤灰砖进行蒸养的大型压力容器,在釜内完成Cao—Si02—H2O的水热反应。 Product introduction: This kettle is a large pressure vessel for steam curing of aerated concrete, lime sand brick and coal ash brick. The hydrothermal reaction of Cao-Si02-H2O is completed in the kettle. At the same time, it is also widely used in other production projects that require pressure steam curing production process. Such as high-strength gypsum, thermal insulation materials, rubber products, high-strength glass, cement pipe piles and wood, medicine, chemical and other industries. The company can also design and manufacture various types of pressure kettles according to user requirements to meet the needs of users for various purposes. The kettle door seal adopts imported rubber seal rings produced by professional manufacturers, which is easy to install, has good sealing performance and long service life.

24-hour service hotline: 15896709659 (Manager Dong)

Product introduction Working principle Performance advantage Technical parameters

product description

This kettle is a large pressure vessel for steam curing of aerated concrete, lime sand brick and coal ash brick. The hydrothermal reaction of Cao-Si02-H2O is completed in the kettle. At the same time, it is also widely used in other production projects that require pressure steam curing production process. Such as high-strength gypsum, thermal insulation materials, rubber products, high-strength glass, cement pipe piles and wood, medicine, chemical and other industries. The company can also design and manufacture various types of pressure kettles according to user requirements to meet the needs of users for various purposes. The kettle door seal adopts imported rubber seal rings produced by professional manufacturers, which is easy to install, has good sealing performance and long service life. The kettle is a steel horizontal cylinder device, and the kettle cover is made of a single piece of 16MnR steel plate. The kettle cover flange and kettle body flange are made of 16Mn integral forging. The welded joints of the pressure parts are heat treated and strictly non-destructive tested according to relevant standards. The kettle door is a quick opening door structure, which is opened and closed by a hand-cranked reducer. It can also be opened or closed by electric, pneumatic or hydraulic according to the user. Equipped with perfect safety interlock protection device, to avoid the danger of misoperation to the greatest extent, and ensure the safe operation of the autoclave and the safe production of operators. There are two types of door opening: side opening and top opening for users to choose. The side opening type adopts the swing arm type door opening structure. Flexible rotation, low-position operation, simple and convenient opening; the upper opening type uses a lever-type door opening mechanism, the lower end of the lever is connected to the kettle door, and the upper end is equipped with a counterweight device. The kettle body support is provided with three forms of fixed support, movable support and special end support for different parts. It is well adapted to the thermal expansion and contraction of the kettle body, and the normal operation and service life of the autoclave. The kettle is equipped with necessary valves and instruments such as safety valves, pressure gauges, temperature measuring elements, steam inlet and exhaust valves, sealed ball valves, traps, etc., and a decontamination tank is available for users to choose. In addition to the conventional steam distribution pipes and guide rails, the internal parts of this kettle are more user-oriented, and are equipped with a sealed steam hood and a hydrophobic cover. The autoclave produced by our company has outstanding design. Rigorous manufacturing and strict compliance with relevant national pressure vessel specifications.

working principle

When the autoclave kettle body is placed on site, it should be supported by two supports. The bearings and the kettle body should be in uniform contact. The distance between the two supports is about 3/5 of the length of the kettle, and they should be symmetrically arranged. For those that are not to be installed temporarily, at least four supports should be provided uniformly, and the end face of the support should be no more than 2.5m, and the support and the kettle should be in uniform contact. The purpose of this is to prevent the kettle from deforming. In addition, measures should be taken to prevent corrosion.

Performance advantage

1. This kettle is a steel horizontal cylinder device. The kettle cover is made of a single piece of 16MnR steel plate. The kettle cover flange and the kettle body flange are made of 16Mn as a whole. The welded joints of the pressed parts have been heat treated and strictly non-destructive tested according to relevant standards. 2. The kettle door is a fast-opening door structure, which is opened and closed by a hand-cranked reducer. Electric, pneumatic, and hydraulic opening and closing can also be used according to user requirements. Equipped with a complete safety interlock protection device, to avoid the danger of misoperation to the greatest extent, to ensure the safe operation of the autoclave and the safe production of operators. There are two types of door opening: side opening and top opening for users to choose. The side opening type adopts a rotating arm type door opening mechanism, which is flexible in rotation, low-position operation, and easy to open; the upper opening type uses a lever type door opening mechanism, the lower end of the lever is connected to the kettle door, and the upper end is equipped with a counterweight device. This type is easy to open and the side of the kettle Small footprint. 3. The kettle door seal adopts imported rubber seals produced by professional manufacturers, which is easy to install, has good sealing performance and long service life. The kettle body support is provided with three forms of fixed support, movable support and special end support for different parts. It is well adapted to the thermal expansion and contraction of the kettle body, ensuring the normal operation and service life of the autoclave. 4. The kettle is equipped with safety valves, pressure gauges, temperature measuring elements, inlet and exhaust valves, sealed ball valves, traps and other necessary valves and instruments, and a decontamination tank is available for users to choose. 5. In addition to the conventional steam distribution pipe and guide rails, the internal parts of the kettle are more user-oriented and are equipped with a sealed steam hood and a water-repellent hood. 6. The autoclave produced by our company has outstanding design, rigorous manufacturing, and strictly follows the relevant national pressure vessel specifications.

Technical Parameters

Model vessel inner diameter m Effective length L1 (m) Maximum working pressure MPa Maximum working temperature ℃ Design pressure MPa Design temperature ℃ Total length of working medium L (mm) Width W (mm) Height H (mm) FGZCS1.0-1.65 × 21 Φ1.65 21 1.0 183 1.1 187 Saturated steam 21650 1650 2595 FGZCS1.3-1.65 × 21 Φ1.65 21 1.3 194 1.4 198 Saturated steam 21650 1650 2590 FGZCS1.0-2.0 × 21 Φ2.0 21 1.0 183 1.1 187 Saturated steam 22300 2000 3225 FGZCS1.3-2.0 × 21 Φ2.0 21 1.3 194 1.4 198 Saturated steam 22300 2000 3225 FGZCS1.3-2.0 × 26 Φ2.0 26 1.3 194 1.4 198 Saturated steam 27650 2000 3225 FGZCS1.3-2.0 × 31 Φ2.0 31 1.3 194 1.4 198 Saturated steam 32750 2000 3225 FGZCS1.0-2.5 × 24 Φ2.5 24 1.0 183 1.1 187 Saturated steam 25560 2500 3967 FGZCS1.3-2.5 × 24 Φ2.5 24 1.3 194 1.4 198 Saturated steam 25560 2500 3967 FGZCS1.5-2.85 × 26 Φ2.85 26 1.5 201 1.6 204 saturated steam 27650 2850 4493 FGZCS1.5-2.5 × 39 Φ2.5 39 1.5 201 1.6 204 saturated steam 40550 2500 3967 FGZCS1.5-3.0 × 26 Φ3.0 26 1.5 20